JVC RX-6500VBK Bedienungsanleitung PDF herunterladen (Seite 10)

English

Digital connections

This receiver is equipped with one DIGITAL OUT terminal and

three DIGITAL IN terminals — one digital coaxial terminal and two

digital optical terminal.

You can connect any digital equipment such as DBS tuner, DVD

player, CD player, and MD recorder to one of the digital terminals

using a digital coaxial cable (not supplied) or digital optical cable

(not supplied).

IMPORTANT:

• When connecting the DVD player or the DBS tuner using the digital

terminal, you also need to connect it to the video jack on the rear.

Without connecting it to the video jack, you can view no playback

picture.

• After connecting the components using the DIGITAL IN terminals,

set the following correctly if necessary.

– Set the digital input (DIGITAL IN) terminal setting correctly. For

details, see “Digital Input (DIGITAL IN) Terminal Setting” on page

14.

– Select the digital input mode correctly. For details, see “Selecting

the Analog or Digital Input Mode” on page 14.

Connecting the Power Cord

Before plugging the receiver into an AC outlet, make sure that all

connections have been made.

Plug the power cord into an AC outlet.

Keep the power cord away from the

connecting cables and the antenna. The

power cord may cause noise or screen

interference. We recommend that you use a coaxial cable to connect

the antenna, since it is well-shielded against interference.

Note:

The preset settings such as preset channels and sound adjustment

may be erased in a few days in the following cases:

– When you unplug the power cord.

– When a power failure occurs.

CAUTIONS:

• Do not touch the power cord with wet hands.

• Do not pull on the power cord to unplug the cord. When unplugging

the cord, always grasp the plug so as not to damage the cord.

Putting Batteries in the Remote Control

Before using the remote control, put two supplied batteries first.

When using the remote control, aim the remote control directly at

the remote sensor on the receiver.

1. On the back of the remote control, remove the

battery cover.

2. Insert batteries. Make sure to match the polarity:

(+) to (+) and (–) to (–).

3. Replace the cover.

If the range or effectiveness of the remote control decreases, replace

the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.

CAUTION:

Follow these precautions to avoid leaking or cracking cells:

• Place batteries in the remote control so they match the polarity: (+)

to (+) and (–) to (–).

• Use the correct type of batteries. Batteries that look similar may

differ in voltage.

• Always replace both batteries at the same time.

• Do not expose batteries to heat or flame.

Notes:

• When shipped from the factory, the DIGITAL IN terminals has been

set for use with the following components.

– DIGITAL 1 (coaxial): For DVD player

– DIGITAL 2 (optical): For CD player

– DIGITAL 3 (optical): For DBS tuner

• When you want to operate the CD player or MD recorder using the

COMPU LINK remote control system, connect the target

component also as described in “Analog connections” (see page 5).

• When you want to operate the DVD player using the AV COMPU

LINK remote control system, connect the DVD player also as

described in “Analog connections” (see page 5).

DIGITAL IN

DIGITAL 3 (DBS)

DIGITAL 2 (CD)

DIGITAL 1

(DVD)

PCM / DOLBY DIGITAL

/ DTS

DVD

DVD player, etc

Before connecting a digital

optical cable, unplug the

protective plug.

When the component has a digital

optical output terminal, connect it to

the DIGITAL 2 (CD) or DIGITAL 3

(DBS), using a digital optical cable

(not supplied).

When the component has a digital

coaxial output terminal, connect it to

the DIGITAL 1 (DVD) terminal, using a

digital coaxial cable (not supplied).

DIGITAL OUT

PCM / DOLBY DIGITAL

/ DTS

When the digital recording

equipment such as an MD recorder

has a digital optical input terminal,

connecting it to the DIGITAL OUT

terminal enables you digital-to-

digital recording.

MD recorder, etc

EN01-07.RX-6500V[J] 99.12.16, 1:17 PM7

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

JVC RX-6500VBK Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver JVC RX-6500VBK