JVC Switch K3-R Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Vernetzung JVC Switch K3-R herunter. JVC Switch K3-R User's Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 22
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Technical Support: 201-934-5111
Main: 201-934-9944
tech@dataprobe.com
Website: dataprobe.com
General Description
The K3 Series A/B Switching system provide up to 3 AB switches in a 1.75 in rack mount chassis for 19”
Equipment cabinets. Each switch allows a common circuit (COM) to be switched to either of two circuits,
designated A and B. The switches can be controlled locally with a front panel toggle switch and remotely
by; contact closure, or thru a Serial port and Ethernet connection using Telnet, SNMP, or a Web browser.
Modular System
The K3 System consists of the K3 Chassis, Model K3-R and Power, Control and A/B Switch options.
The following table illustrates the available K3 components available at the time of printing. Additional
options may be available; contact Dataprobe.
SKU Model Description
Base
1150100 K3-R K3 Chassis
Control
1340062 C-AB-16-R IP and Serial Control Card, Individual Switch Control
1340065 C-AB-1-R IP Control Card, Gang Control
1340063 G-AB-1-R Gang Expansion or GPI Control
Power
1930077 PS-R1-WRI Internal AC Power Supply 100-240VAC
1930078 PS-R1-48 Internal -48VDC Power Supply
1930079 PS-R1-224 Dual External 24VDC Power Supply. For use with External AC Supply
1930076 PS-WRI-4 External A/C Power Supply
A/B
1110100 AB-R-D25 25 Pin D Subminiature, all 25 pins supported
1110101 AB-R-RJ8
8 Wire Modular Jacks; All leads switched. Supports RJ48C, RJ48S, RJ45 and
all 8 position modular jack specifications, up to16Mhz
1110102 AB-R-2RJ8 Same as above with two ganged switches.
1110103 AB-R-NET
8 Position, 8 Wire Modular Jacks; All leads switched; Supports 10/100/1G
Ethernet Network specifications.
1110104 AB-R-T50
50 Pin Telco (Amphenol) connector. All 50 Leads Switched. Dual Height
Switch must be in Slot 1
1110105 AB-R-M34
34 Pin M Type (V.35) connector. 23 leads switched. Dual Height Switch must
be in Slot 1
1920028 AB-FP Blank Panel for unused A/B Slots. Required for FCC and CE marking
K3 Series
1U Rack Mount A/B Switches
K3_system_v070607e
Seitenansicht 0
1 2 3 4 5 6 ... 21 22

Inhaltsverzeichnis

Seite 1 - General Description

Technical Support: 201-934-5111Main: [email protected]: dataprobe.com General Description The K3 Series A/B Switching system

Seite 2 - K3 Chassis

K3 1RU AB Switch Page 10 Com Port: Set the Baud Rate and Character Format for the serial port. Baud rate choices are 9600, 1

Seite 3 - Power Supplies Modules

K3 1RU AB Switch Page 11 Note: After changing the IP Address, Web Port, Telnet Port or Com Port parameters, it is necessary to

Seite 4 - Rear View

K3 1RU AB Switch Page 12 The web page shows the current status of each enabled card in the chassis. It also displays the stat

Seite 5 - Control Modules

K3 1RU AB Switch Page 13 If cards are not installed in the system, their status will be reported as Position A. To avoid confus

Seite 6

K3 1RU AB Switch Page 14 A logout button is provided. Click this button to be instantly logged out. There is an automatic logo

Seite 7

K3 1RU AB Switch Page 15 SNMP Manager Control The C-AB-16-R allows for management via SNMP. The private MIB is available from

Seite 8

K3 1RU AB Switch Page 16 cr = The ASCII carriage return character If the queried card has been disabled then no response wil

Seite 9

K3 1RU AB Switch Page 17 SW'D COMFG ISO1A1B1COMShown In Factory Default: Ground Switched & IsolatedA/B Switch Modules

Seite 10 - IP Settings

K3 1RU AB Switch Page 18 Specifications Switch Interfaces D25 Three 25 Pin D Subminiature, Female Connectors. 25 l

Seite 11 - Web Browser Operation

K3 1RU AB Switch Page 19 MIB Outine NOTE: The K3 Series AB Switch System use the same network control interface as our larger K

Seite 12

K3 System Page 2 Installation & Operation K3 Chassis The K3 Chassis holds the Power, Control and A/B Switch modules for the K3 system. It

Seite 13

K3 1RU AB Switch Page 20 MIB Definitions k16RackName 1.3.6.1.4.1.1418.1.1.1 This read/write variable is the name of the k16 nest

Seite 14 - Telnet and Serial Port

K3 1RU AB Switch Page 21 k16PowerSupply1 1.3.6.1.4.1.1418.1.1.4 This read only variable returns the current status of the power

Seite 15

K16 Series Standalone/ -R1 Mount Page 22 TECHNICAL SUPPORT, RETURNS and WARRANTY Dataprobe Technical Support is available 8:30AM to 5:30PM ET

Seite 16 - Installation

K3 System Page 3 Power Supply 1930077 Converts 110/ 220 /240 VAC to 24VDC Single Slot Redundant Capable Input Power Nominal : 120/240 VAC 50/60

Seite 17 - A/B Switch Modules

K3 1RU AB Switch Page 4 Alarm Connector Alarm Connection on each power supply provides status information on the condition of t

Seite 18 - Specifications

K3 1RU AB Switch Page 5 Control Modules The K3 Series AB Switch System is available with three types of control modules; Networ

Seite 19 - MIB Outine

K3 1RU AB Switch Page 6 Serial Port The Serial Port on the control card is a 9 pin male connector, configured as a DTE. The fo

Seite 20 - MIB Definitions

K3 1RU AB Switch Page 7 Setting the IP address using ARP To set the IP address using ARP, connect the jack marked 10Base-T to yo

Seite 21

K3 1RU AB Switch Page 8 This password is case sensitive and can be changed in the setup process. In telnet, the The C-AB-16-R h

Seite 22 - WARRANTY

K3 1RU AB Switch Page 9 Select 6 for IP Settings. The IP Settings Menu appears: IP Settings 1. IP Address 192.16

Kommentare zu diesen Handbüchern

Keine Kommentare